International Plastic Modelers' Society / USA

International Plastic Modelers' Society / USA

IPMS/USA

IPMS/USA

Posted on: July 21, 2021

Old Business

  • None.

New Business

  • Election results. Ron Bell has been elected president effective Nov. 1, 2015. Other officers will include 1VP David Morrissette, 2VP Mike VanSchoonhoven, Secretary Dennis Tennant and Historian/Director of Publications Jim Pearsall.
  • Let's look into the advertising rates in the Journal. We have never increased our ad rates and, in light of the rates charged by competitors, it might be time to increase ours. Jim Pearsall will look into this and research the ad rates of comparable publications and report back to the board.
  • We continue to look for less expensive alternatives to our current Make N Take supplier (Revell). Jim Brooks is...
read more...
Posted on: July 21, 2021

Old Business

  • Make and take developments (discussed in DLC's section below).

New Business

  • Dick Christ: We need to start working on next year's budget. We need projected costs
    from everyone. We need to start the process and I would like to have it completed when the new administration starts on November 1.

Officer/Staff Reports

Dick Christ, President

  • No new items to report.

David Morrissette, 1st VP

  • Late reviews as 60 and declining. This is normal for the summer months.
  • The Manufacturers' Dinner was held during Convention week and went well with Eduard, Revell, Werner Wings, Academy, Yellow Wings, Detail and Scale, Kittyhawk and Aires...
read more...
Posted on: July 21, 2021

Officer/Staff Reports

The annual Business Meeting began promptly at 9 a.m. President Dick Christ convened the meeting and .

Pres. Christ...

read more...
Posted on: July 21, 2021

Officer/Staff Reports

Dick Christ, President

  • No new items to report.

David Morrissette, 1st VP

  • There have been 419 new reviews posted through the end of May.
  • The Manufacturers' Dinner at the convention has been arranged and invites have been sent.
  • There are sixty late reviews in the system.

Ron Bell, 2nd Vice President

  • The convention numbers update:
    • 350 Pre-registrants
    • 170 Banquet tickets sold
    • 83 Signed up for the AFM tour
    • 59 Dinner at Schmidt's restaurant
    • 160 Convention shirts sold so far
  • Las Vegas dropped out of bidding for 2016, leaving Omaha and Phoenix. I have...
read more...
Posted on: July 21, 2021

Old Business

  • Ad Manager position still unfilled. Jim Pearsall hoping to find a candidate by the convention. If not Jim will do the job until he can find a worthy candidate.

New Business

  • None.

Officer/Staff Reports

Dick Christ, President

  • No new items to report.

David Morrissette, 1st VP

  • The Convention Manufacturers dinner has been set up. So far, a half dozen or so manufacturers have responded that they'll attend.
    Late reviews are at 65.
  • I have received a test shot of HK Models new 1:32 Mosquito....
read more...
Posted on: July 21, 2021

Old Business

  • So far, one person has expressed interest in the position of Advertising Manager of the Journal. Jim Pearsall will be interviewing him in the next week about the job, duties, etc.
  • President Christ has spoken with Don Schmitz about setting up a marketing committee to promote the IPMS/USA. He has directed him to choose a committee and establish a budget for fiscal 2016. Schmitz will present a report on his progress and goals at the board meeting in Columbus later this summer.

New Business

  • Following Webmaster Eric Aitala's recommendations, the board approved switching e-commerce vendors for our Web site. The new site will not go "live" till after the...

read more...
Posted on: July 21, 2021

Old Business

  • We continue to look for replacements for the volunteer positions of Advertising Director, Forum Administrator and Director of Foreign Liaison. Ads will be placed online or in the Journal.

New Business

  • Following a suggestion from Don Schmitz (#35303) that the Society create an internal group to plan and coordinate marketing-related activities across the organization, the board passed, by acclimation, a motion to create a new standing committee to focus on marketing. President Dick Christ will contact Schmitz to get the ball rolling.

  • DLC Larry Randel made the motion to appoint Jim Stepanek as the new Regional Coordinator for Region 11. Sec. Dennis Tennant seconded the nomination and the motion...

read more...
Posted on: July 21, 2021

Old Business

  • Ongoing discussion about our electronic shopping cart. Webmaster Eric Aitala is test-driving new shopping cart software to see if it will suit our needs. Eric: working on playing with new software to see how it works. So far, no conclusions. Eric will continue testing and will give the board an update next month.
  • The Director of Foreign Liaison and Journal Executive Editor / Advertising Director positions need to be filled after recent resignations. An invitation for applicants will be printed in the next Journal along with job descriptions for both.

New Business

  • Tony Ivone, Regional Coordinator for Region 11 (Florida) has resigned. DLC Larry Randel will be interviewing two candidates for the job and will give his...
read more...
Posted on: July 21, 2021

Old Business

  • Ongoing discussion about improvements to our online shopping cart.

New Business

  • We will begin the process of finding a replacement for John Ratzenberger as Director of Foreign Liaison as soon as possible. John is stepping down and we'll need to replace him in this position. We plan to start the search with an announcement in the Journal. Interested parties can find the job description in the bylaws posted online.
  • A motion was made by Bruce Briggs to accept the 2014 convention report from IPMS Tidewater and to cut them a check for their half of the profits. Jim Pearsall seconded the motion and the executive board voted 9-0 to approve the report and cut them a check as soon as possible.
  • In response to a...
read more...
Posted on: July 21, 2021

Action Items

  • No motions made or voted upon.

Officer/Staff Reports

Ron Bell, President

  • Membership pin design is done. Need to wait until January 1, 2017 so we can get an accurate number of each that we will need so I can then go to supplier to place the order.
  • Have established the time line for the election/vote on amendment.
  • I’m working with the Journal editor to format the amendment info for publication since it is so extensive.

David Morrissette, 1st VP

  • Posted 100 reviews in October; yearly total is 814. Should finish close to last year’s total.
  • New Supplier include Miniart directly & Tiger Model, Squadron has dried up as a source of Hobbyboss kits...
read more...