Feed aggregator
1 new photo (March 21)
- 1 new photo (Recent photos)
- 1 album updated
- Box Art Archive / Manufacturers / Manufacturers M through P / Monogram / Automotive - General / Others (1 new photo)
...
1 new photo (March 21)
- 1 new photo (Recent photos)
- 1 album updated
- Box Art Archive / Automotive Box Art / Small Trucks and Vans / Trucks / Truck Chassis (1 new photo)
...
1 new photo (March 21)
- 1 new photo (Recent photos)
- 1 album updated
- Box Art Archive / Automotive Box Art / Small Trucks and Vans / Trucks / Car Chassis (1 new photo)
...
1 new photo (March 21)
- 1 new photo (Recent photos)
- 1 album updated
- Box Art Archive / Automotive Box Art / Motorcycles (1 new photo)
...
35th scale Sd.Kfz. 234/2 "Puma" Schwerer Panzerspähwagen full interior kit from MiniArt: Sprue Preview
3 new photos (March 21)
- 3 new photos (Recent photos)
- 1 album updated
- Box Art Archive / Manufacturers / Manufacturers I through L / Life Miniatures (3 new photos)
...
3 new photos (March 21)
- 3 new photos (Recent photos)
- 1 album updated
- Box Art Archive / Manufacturers / Manufacturers E through H / Horizon (3 new photos)
...
These J-79 Exhaust Nozzles (for the Kinetic Kit No. 48083 primarily, and K48090 and K48093, and most likely any F-104 Starfighter that utilized the J-79 General Electric axial-flow turbojet engine) are a recent release by Chinese manufacturer Fab Scale...
These J-79 Exhaust Nozzles (for the Kinetic Kit No. 48083 primarily, and K48090 and K48093, and most likely any F-104 Starfighter that utilized the J-79 General Electric axial-flow turbojet engine) are a recent release by Chinese manufacturer Fab Scale. Fab Scale’s online presence is hard to find with the provided QR codes stating that the site can’t be reached). The same is for the supplier, Warspite Model Company. It is a shame as this three-piece exhaust nozzle set is exquisite!
The sturdy box protects the three pieces, each in their own protective Ziplock pouch. The instructions are the box art which shows the arrangement of the three parts. Removal of the 3D supports with a razor saw is easy and, after a quick wash, ready for assembly.
This 27th publication of the ‘Europe at War’ series was of particular interest to me personally. I lived in northern Germany in the years leading up to and including the Fall of the Berlin Wall and had many direct encounters – most of them not good –...
This 27th publication of the ‘Europe at War’ series was of particular interest to me personally. I lived in northern Germany in the years leading up to and including the Fall of the Berlin Wall and had many direct encounters – most of them not good – with East German authorities.
Andrew Long of Great Britain is a military history researcher. His interest in the Cold War begin with a trip to West Berlin in 1986 (perhaps he and I crossed paths and didn’t even know it!). He traveled through Check Point Charlie to visit East Berlin. Andrew makes sense of this very complex period of history by intertwining stories of politics, ideology, personalities, technology and geography. He has also written Cold War Berlin: An Island City, Volumes 1 & 2 as well as ‘Secrets of the Cold War’.
IntroductionThis is a continuation in the Hawker Hurricane series being released by Arma Hobby. This is the fourth release in the Hurricane series. Previous releases included the Mk IIc and Mk IIc tropical, and the Mk IIc “Jubilee”. The Sea Hurricane ...
This is a continuation in the Hawker Hurricane series being released by Arma Hobby. This is the fourth release in the Hurricane series. Previous releases included the Mk IIc and Mk IIc tropical, and the Mk IIc “Jubilee”. The Sea Hurricane (Mk IIc) is their next release. I believe that this review will be applicable to any of their Hurricanes. It is obviously a common molding for all variants.
Reviewer’s CommentsI recently reviewed the Hobby Boss Hurricane Mk IIc and I thought it would be great to review an Arma hurricane as a comparison.
A new set of 3D printed F-16 LAU-129 Missile Launcher in 1/48th scale (4 pieces) is provided by Fab Scale for the Tamiya kit. This is a drop-in replacement for the Tamiya kit for launchers that hold AIM-9 Sidewinders or AIM-120 AMRAAM missiles.Note:...
A new set of 3D printed F-16 LAU-129 Missile Launcher in 1/48th scale (4 pieces) is provided by Fab Scale for the Tamiya kit. This is a drop-in replacement for the Tamiya kit for launchers that hold AIM-9 Sidewinders or AIM-120 AMRAAM missiles.
Note: There is no official website for Fab Scale, a business card was inside the box referencing Scalemates.com
In The Package & Product NotesThe sample review I received came in a small plastic box wrapped in a Ziploc bag and surrounded by foam.
There are four (4) 3D printed LAU-129 missile launchers printed with pink salmon colored resin. These parts can replace C28 & C29 from the Tamiya kit.
The printed resolution of the missile launcher is amazing. There is a lot of tiny detail throughout the entire part and some careful painting and contrast weathering will make them pop.
The Gotha Go-242 was a World War II Luftwaffe Transport Glider. Typically towed by another aircraft into combat, the glider would release, land, and then deploy its cargo of men and material. It was used in France, Africa, and the Eastern Front for the...
The Gotha Go-242 was a World War II Luftwaffe Transport Glider. Typically towed by another aircraft into combat, the glider would release, land, and then deploy its cargo of men and material. It was used in France, Africa, and the Eastern Front for the German Army. There were different variants designed which featured different landing gear configuration as well as one that had engines. ICM has produced these different versions as well in the following kits. (48224 Go-244B and 48226 Go-242A)
A new 3D printed F-16 Exhaust Nozzle set in 1/48th scale is provided by Fab Scale as drop-in replacements for the Tamiya kit (General Electric F110 engine).Note: There is no official website for Fab Scale at the time of this review, but a few foreign...
A new 3D printed F-16 Exhaust Nozzle set in 1/48th scale is provided by Fab Scale as drop-in replacements for the Tamiya kit (General Electric F110 engine).
Note: There is no official website for Fab Scale at the time of this review, but a few foreign hobby websites were selling the exhaust nozzle.
In The Package & Product Notes
The sample review came in a small cardboard box and parts are individually wrapped in Ziploc bags.
There are three (3) parts of this exhaust nozzle set printed with pink salmon colored resin. These parts replace kit parts A18, H12 & H3. The printed resolution of the exhaust nozzle is very fine with no build up layers and the print quality is excellent.
Review Process
A new F-16 one-piece 3D printed resin intake in 1/48th scale is provided by Fab Scale for the Tamiya kit.This is a drop-in replacement for the Big Mouth intake for the GE F110 Engine. Sample comparison Tamiya kit is from Block 50.Note: There is no...
A new F-16 one-piece 3D printed resin intake in 1/48th scale is provided by Fab Scale for the Tamiya kit.This is a drop-in replacement for the Big Mouth intake for the GE F110 Engine. Sample comparison Tamiya kit is from Block 50.
Note: There is no official website for Fab Scale, a business card was inside the box referencing Scalemates.com
In The Package & Product NotesThe sample review came in a small plastic box and was wrapped in a Ziploc bag.
There is one (1) 3D printed part made from white colored resin. This part will replace H5 & H9 from the Tamiya kit.
The printed resolution of this intake is excellent and is an exact replica of the Tamiya parts but without the seam running horizontally on the sides.
TheSaab 35 Draken is the latest publication from Duke Hawkins Books and is the thirty-first volume of a series of books that they have recently published highlighting modern aircraft. This series got its start with The Sepecat Jaguar in July 2017 and...
TheSaab 35 Draken is the latest publication from Duke Hawkins Books and is the thirty-first volume of a series of books that they have recently published highlighting modern aircraft. This series got its start with The Sepecat Jaguar in July 2017 and has been quite successful. There is also a special limited edition on the Belgian Air Force F-16 and on the Juan Carlos I Aircraft Carrier. This series of publications fall under the name of Duke Hawkins, but it is not clear exactly who Duke Hawkins is. If you check out other retail sites on this series, you can findRobert Pied and Nicolas Deboeck listed as authors, but there is not much additional information on them. One of the bylines goes like this:
Built up kit walk around: MiniArt's 35th scale T-55 Iraqi T-55 AL FAW/Enigma. Soviet Made Base
Episode 89: Posse Roundtable Catch Up - Show Season, 48 in 48 Recap, Dune 2
A short episode this time out - we are all busy with work and Model Show Season. All of us sans JB catch up with each other and discuss kits, bench progress, 48 in 48 Wrap Up, and Dune 2!
If you would like to become a Posse Outrider, and make a recurring monthly donation of $ 1 and up, visit us at www.patreon.com/plasticpossepodcast .
Plastic Posse Podcast on Facebook: https://www.facebook.com/PlasticPosse
Plastic Posse Group on Facebook: https://www.facebook.com/groups/302255047706269
Plastic Posse Podcast MERCH! : https://plastic-posse-podcast.creator-spring.com/ OR loungetrousers.com
Plastic Posse Podcast on YouTube:https://www.youtube.com/channel/UCP7O9C8b-rQx8JvxFKfG-Kw
Orion Paintworks (TJ): https://www.facebook.com/orionpaintworks
JB-Closet Modeler (JB): https://www.facebook.com/closetmodeler
Three Tens' Modelworks (Ivan): https://www.facebook.com/ThreeTensModelWorks
SPONSORS:
Tankraft: https://tankraft.com/
AK Interactive: https://ak-interactive.com/
Tamiya USA: https://www.tamiyausa.com/
35th scale Sd.Kfz. 234/2 "Puma" Schwerer Panzerspähwagen full interior kit from MiniArt.
New Zulu Decals & Pavehawk book from Cavu Publications...
Please note: this is a companion review for the Hawaiian Air Depot masks; here is the review for the MiniArt P-47D.MiniArt and Hawaiian Air Depot Link to product on company site: https://miniart-models.com/product/48001-p-47d-25re-thunderbolt-advanced...
Please note: this is a companion review for the Hawaiian Air Depot masks; here is the review for the MiniArt P-47D.
MiniArt and Hawaiian Air Depot
Link to product on company site: https://miniart-models.com/product/48001-p-47d-25re-thunderbolt-advanced-kit/